1L AQUACOLY Wall Sealer (White Only)

AQUACOLY WALL SEALER is a multi-purpose, easy-to-use, water-based acrylic white emulsion primer. It can seal perfectly on all kinds of surfaces to prevent paint cracking or poor adhesion.
 
Paint Condition :
Colour : White 
Gloss : Matt 
Drying Time：
- Touch Dry: 20-30 minutes 
- Recoat Time : 2-3 hours
Clean Up : Tap Water
 
Performance Benefits 
- Non-toxic
- Fast drying
- Good adhesion on most surfaces
- Low VOC
 
Application:
Method : Brush or Roller
Coverage : 8-10 sq.m. per litre (Depends on surface porosity and application method)
Reduction : Up to 20% by volume with water (This may affect the hiding strength)
Number of coats : 1-2 full coats
Recommended Dry Film : 35-45 microns
Recommended Dry Film : 110-145 microns
Shelf Life : 2 years
 
Direction For Use: 
- Use personal care gloves and eye goggle
- All equipment (spray gun etc) should be washed clean immediately after use
- Avoid material from freezing 
- Avoid breathing vapor and spray mist. Use adequate ventilation 
 
Surface Preparation :
For Wood Substrates
Ensure substrate is free from loose dirt, dust, grease , oil, wax, must be firm, free from mildew and other foreign matter.
 
For Mineral Substrates 
Remove uncurled plaster, cement, mood, release agent and other foreign matter. Prime with AQUACOLY WALL SEALER or with other recommended undercoat.
 
For Previously Painted Substrates 
Completely remove old loose paint before application. Spot prime with AQUACOLY WALL SEALER if necessary.